Finite element analyses of mode I interlaminar delamination in z-fibre reinforced composite laminates
نویسندگان
چکیده
منابع مشابه
Experimental study on effect of loading rate on mode I delamination of z-pin reinforced laminates
This paper presents an experimental investigation on mode I delamination of z-pinned double-cantilever-beams (DCB) and associate z-pin bridging mechanisms. Tests were performed with three types of samples: big-pin with an areal density of 2%, small-pin with an areal density of 2% and small-pin with an areal density of 0.5%. The loading rates for each type of samples were set at 1 mm/min and 100...
متن کاملMixed-mode I/II Interlaminar Fracture of CF/PEI Composite Material
Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...
متن کاملMode II delamination toughness of z-pinned laminates
Mode II delamination toughness of z-pin reinforced composite laminates is investigated using finite element (FE) method. The z-pin pullout process is simulated by the deformation and breakage of non-linear springs. A critical shear stress criterion based on linear elastic fracture mechanics is used to simulate crack growth in an end-notched-flexure (ENF) beam made of z-pinned laminates. The mod...
متن کاملComprehensively simulating the mixed-mode progressive delamination in composite laminates
Gao, Zhenyuan MSAA, Purdue University, May 2015. Comprehensively Simulating the Mixed-Mode Progressive Delamination in Composite Laminates. Major Professor: Wenbin Yu. Delamination, or interlaminar debonding, is a commonly observed failure mechanism in composite laminates. It is of great significance to comprehensively simulate the mixed-mode progressive delamination in composite structures bec...
متن کاملReal-time Detection and Explicit Finite Element Simulation of Delamination in Composite Laminates under Impact Loading
A new experimental technique is developed to determine the onset and evolution of delamination in fiber-reinforced composites under impact loading. The configuration uses a split-Hopkinson bar for low-velocity impact loading and two Polytec laser vibrometer systems for real-time monitoring of the initiation and progression of delamination. The experiment allows the histories of load, displaceme...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Science and Technology
سال: 2003
ISSN: 0266-3538
DOI: 10.1016/s0266-3538(03)00134-9