Finemet Thin Films Substituted by Chromium - CEMS and MOKE Study

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of Scaling Properties of Hysteresis in Finemet Thin Films

We study the behavior of hysteresis loops in Finemet Fe73.5Cu1Nb3Si18.5B4 thin films by using a fluxometric setup based on a couple of well compensated pickup coils. The presence of scaling laws of the hysteresis area is investigated as a function of the amplitude and frequency of the applied field, considering sample thickness from about 20 nm to 5 μm. We do not observed any scaling predicted ...

متن کامل

Study of Crystallization Process in V-substituted Finemet Alloys

Nanocrystalline soft magnetic alloys can be produced by partial crystallization of amorphous precursor. The aim of this paper was to study the influence of Nb substitution by vanadium (V) in Fe73.5Cu1Nb3-xVxB9Si13.5 (x=1.5, 3) alloys on their crystallization process and the glass forming ability because the growth of the α-Fe(Si) crystals is reduced by (Nb) diffusion barrier. Amorphous ribbons ...

متن کامل

Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films

Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...

متن کامل

Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films

Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Acta Physica Polonica A

سال: 2010

ISSN: 0587-4246,1898-794X

DOI: 10.12693/aphyspola.118.794