FIELD TESTS AND ANALYSIS OF A GLUED-LAMINATED TIMBER BEAM BRIDGE

Evaluation of a Timber Bridge for the Secondary Road System Using FRP Reinforced Glued-Laminated Girders

One of the goals that the Innovative Bridge Research and Construction (IRBC) program, sponsored by the Federal Highway Administration (FHWA), wishes to achieve through sponsored research projects is the concept of an economical, durable, short-span bridge that reduces construction time. Delaware County, Iowa took a step in that direction through the construction of a 64 ft. long bridge comprise...

Computer-aided Design and Construction of Glued Laminated Timber Structure

The paper presents the computer-aided design and construction of a large glued laminated timber structure in Aosta, Italy. The structure was completely computer modelled with in-house developed software, which considers both torsion and curvature constraints of timber. Further proprietary software was used to develop, on a plane, the shape of each timber layer without torsion and curvature . Th...

Feasibility of glued laminated timber beams 1 with tropical hardwoods

11 A feasibility study of glulam was carried out in French Guiana using local wood species. The aim 12 was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in 13 a tropical climate. 14 Three abundant wood species, with special properties, were selected for the study and 15 Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameter...

Air-coupled ultrasound inspection of glued laminated timber

A novel air-coupled ultrasound (ACU) 120 kHz normal transmission system enabled successful imaging of bonding and saw cut defects in multilayered glulam beams up to 280 mm in height with a signal-to-noise ratio (SNR) of 40 dB. The main wave propagation paths were modeled; quasi-longitudinal and quasi-transverse modes were coupled in each lamella and the sound field was found to be shifted from ...

Ambient vibration tests of a cross-laminated timber building