Field direct shear tests on a backfill soil slope and finite element analysis of its reinforcement schemes
نویسندگان
چکیده
منابع مشابه
A Proposed Modeling Method in Finite Element Slope Stability Analysis
Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...
متن کاملNumerical investigation on the pullout shear strength of soil-nail interface using finite element method
Soil nailing is a popular reinforcement method for stabilizing slopes, excavations, and retaining walls in many countries. The pullout capacity of the soil-nail interface is a critical parameter for the design and safety assessment of soil-nailed systems. In this paper, a three-dimensional (3D) finite element (FE) model is developed using the commercial program ABAQUS to simulate the pullout te...
متن کاملA New Era in Slope Stability Analysis: Shear Strength Reduction Finite Element Technique
This article examines the merits of using finite element analysis versus limit-equilibrium methods for slope design and analysis Geomechanics software used worldwide by geotechnical engineers Article prepared for RocNews Summer 2004 software tools for rock and soil
متن کاملThree-Dimensional Discrete Element Simulations of Direct Shear Tests
Using discrete element methods, geotechnical engineers can create “virtual laboratories” to simulate conventional laboratory tests. In this study, three-dimensional DEM simulations of direct shear tests are coupled with equivalent physical tests on steel balls. The macro-scale response of simulations is compared with the physical test results to validate the discrete element model and to gain i...
متن کاملNumerical Discrete Element Simulation Of Soil Direct Shear Test
One of the most common methods to measure soil mechanical properties (namely cohesion and internal friction angle) is direct shear box test. In this paper the development of a three-dimensional (3D) discrete element soil model for simulation of a cohesive soil’s direct shear test is presented. The aim was to calibrate the properties of the Hertz-Mindlin with bonding contact model available in E...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2020
ISSN: 1755-1315
DOI: 10.1088/1755-1315/558/3/032033