Fiber Textures of Extruded Aluminium Alloy Rod
نویسندگان
چکیده
منابع مشابه
Positron Lifetime Measurements of Subsurface Region in Aluminium Alloy and Aluminium Alloy Composite after Dry Sliding
This paper presents positron lifetime studies of the subsurface region of AK12 aluminium alloy and Al2O3-particle-reinforced AK12 aluminium alloy composite after sliding against steel in the pin-on-disc machine. The defect depth profile detected in the AK12 alloy extended up to 300 μm but for the composite AK12 the range of this profile was significantly shortened to less than ∼ 90 μm. The posi...
متن کاملMechanisms of the Porosity Formation during the Fiber Laser Lap Welding of Aluminium Alloy
J. Wang, Wuhan Textile University, Wuhan, China C. M. Wang, G. Z. Wang, Huazhong University of Science and Technology, Wuhan, China When joining the aluminum alloys, one of the biggest challenges is the formation of porosity, which deteriorates mechanical properties of welds. In this study, the lap welding was conducted on an aluminum alloy 5754 metal sheets with a thickness of 2 mm. The effect...
متن کاملLaser Welding of Aluminium Alloy 5083
There are two laser welding mechanisms, keyhole mode and conduction mode. Keyhole welding is widely used because it produces welds with high aspect ratios and narrow heat affected zones. However keyhole welding can be unstable, as the keyhole oscillates and closes intermittently. This intermittent closure causes porosity due to gas entrapment. Conduction welding, on the other hand, is more stab...
متن کاملTopology Optimization of Aluminium Alloy Wheel
A great number of wheel tests are required in designing and manufacturing of wheels to meet satisfactory requirements. The impact performance of a wheel is the major concern. Numerical implementation of impact test is essential to shorten the design time, improve the mechanical performance and lower development cost. Project includes the “Topology Optimization of Cast Aluminium Alloy wheel” usi...
متن کاملAluminium Alloy Foams: Production and Properties
Ultra-light metal foams became an attractive research field both from the scientific and industrial applications view points. Closed-cell metal foams, in particular aluminium alloy (Al-alloy) ones can be used as lightweight, energy-absorption and damping structures in different industrial sectors, detaining an enormous potential when transportation is concerned. Despite the several manufacturin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1963
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.27.3_95