Fiber Structure in High Speed Melt Spinning of Poly(ethylene terephthalate)/Polymethylmethacrylate.
نویسندگان
چکیده
منابع مشابه
In-Situ X-Ray Characterization of Fiber Structure During Melt Spinning
The properties of a polymer are strongly influenced by its morphology. In the case of fibers from semicrystalline polymers this consists of the degree of crystallinity, the spacing and alignment of the crystalline regions, and molecular orientation of the polymer chains in the amorphous regions. Information on crystallinity and orientation can be obtained from X-ray analysis. In-situ X-ray char...
متن کاملSimulation of Multifilament Semicrystalline Polymer Fiber Melt-Spinning
The goal of this effort is to provide an accurate simulation of multifilament fiber melt spinning, applicable for a wide range of material and process conditions. For ease of use, the model should run on a standard laptop or desktop computer in reasonable time (one hour or less). Most melt spinning models simulate the formation of a single filament, with little or no attention given to multifil...
متن کاملEffects of Thymolphthalein on Thermo-Oxidative Stability of High Density Polyethylene in Melt and Solid States
The present work aimed to evaluate capability of a new molecular structure to stabilize polyethylene against thermal oxidation. Hence, effects of 3,3-bis(4-hydroxy-2-methyl-5-propan-2-ylphenyl)-2-benzofuran-1-one (thymolphthalein) on thermo-oxidative stability of high density polyethylene (HDPE) in both solid and melt states were investigated and compared with those of SONGNOX 1010, a comme...
متن کاملmatrix-fibril morphology and structure of polyblend fibers in melt spinning process: a review
the mechanism and the parameters affecting the matrix-fibril morphology in melt spun polyblend fibers are discussed. the properties of polymeric blends depend considerably on their final morphologies. blending of two miscible polymers, normally gives rise to formation of a single-phase morphology while blending of two immiscible polymers can create a two or three (in case of using compatibilize...
متن کاملOptimal Control of Melt Spinning Processes
An optimal control problem for a mathematical model of a melt spinning process is considered. Newtonian and non–Newtonian models are used to describe the rheology of the polymeric material, the fiber is made of. The extrusion velocity of the polymer at the spinneret as well as the velocity and temperature of the quench air serve as control variables. A constrained optimization problem is derive...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: FIBER
سال: 2002
ISSN: 0037-9875
DOI: 10.2115/fiber.58.287