Ferrite/CdS Composite Magnetic Films Prepared by a Wet Chemical Process.
نویسندگان
چکیده
منابع مشابه
Photocatalytic energy storage ability of TiO2-WO3 composite prepared by wet-chemical technique.
TiO2-WO3 hybrid photocatalysts were prepared using wet-chemical technique, and their energy storage performance was characterized by electrochemical galvanostatic method. TiO2 powder was coupled with WO3 powder, which was used as electron pool and the reductive energy could be stored in. As a result, the prepared TiO2-WO3 had good energy storage ability while pure TiO2 showed no capacity and pu...
متن کاملAgInSe2 thin films prepared by electrodeposition process
In this work, the one step electrodeposition process was used to prepare Ag-In-Se thin films. The films were deposited at room temperature from a bath containing 1-3x10 M AgNO3, 6x10 -2 M InCl3 and 3x10 -2 M of H2SeO3. The KSCN at a concentration of 0.681 M was used as complexing agent. The pH value of the solution was 1.4. Applied potentials to SCE were chosen between -0.3 V and -1.1 V. Films ...
متن کاملinvestigating the characteristics of polyaniline and its composite films prepared by chemical method
0
متن کاملGranular magnetoresistance in cobalt/poly „3-hexylthiophene, 2, 5-diyl... hybrid thin films prepared by a wet chemical method
Cobalt/poly 3-hexylthiophene, 2, 5-diyl P3HT hybrid thin films were prepared by a wet chemical method. Their microstructure consists of a nanoscale mixture of a crystalline P3HT matrix, interspersed with amorphous P3HT regions containing the cobalt nanoparticles. Magnetic and transport measurements are consistent with this microstructure and the temperature dependence of the resistance of these...
متن کاملDry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution
In this research, a thin film of TiO2 was applied on AZ91D using the method of magnetic sputtering. Microstructure investigations were done using field emission scanning electron microscope (FESEM) and X-ray diffraction (XRD). Wear resistance for the coating was investigated using the pin on the disk in the form of dry and in the Ringer's solution. After this test, the worn surface of the sampl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Magnetics Society of Japan
سال: 1996
ISSN: 0285-0192
DOI: 10.3379/jmsjmag.20.317