Ferrite grade iron oxides from ore rejects

Effective Beneficiation of Low Grade Iron Ore Through Jigging Operation

The effectiveness of jigging operation for the beneficiation of low-grade iron ore deposits of Orissa, India has been investigated. Iron ore sample obtained from Barbil region of Orissa containing very high amount of silica and alumina was crushed using the laboratory jaw crusher and roll crusher to prepare different particle sizes. The sink and float tests were carried out to evaluate the poss...

RECOVERY OF IRON FROM LOW-GRADE HEMATITE ORE USING COAL-BASED DIRECT REDUCTION FOLLOWED BY MAGNETIC SEPARATION

In the present work, iron recovery from a low-grade hematite ore (containing less than 40% iron), which is not applicable in common methods of ironmaking, was studied. Non-coking coal was used as reducing agent. Reduction experiments were performed under various coal to hematite ratios and temperatures. Reduction degree was calculated using the gravimetric method. Reduced samples were subjected...

Characterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation

In Sangan iron mine nearly two million tons of low-grade iron ore has been extracted and deposited in the mining site and currently no action is made on them. On the other hand, the mining site is located in the semi-arid region and wet processing has been restricted due to water shortage. In this research, the upgradation of Sangan low-grade iron ore from mine B has been performed by dry low-i...

Iron Ore Rock Recognition Trials

Reverse flotation studies on an Indian low grade iron ore slimes

The present investigation deals with the recovery of iron values from the screw classifier overflow slimes from an iron ore washing plant by means of reverse cationic flotation as an alternate to direct anionic flotation. Selectivity index, an indicator of separation efficiency, was chosen as the response parameter for optimizing the quantity and evaluating a series of generically same but chem...