Femtosecond Laser Processing of Biodegradable Polymers
نویسندگان
چکیده
منابع مشابه
Femtosecond Laser Processing of Nitinol
The effects of femtosecond laser machining on surface characteristics and subsurface microstructure of a Nitinol alloy were studied. The femtosecond laser machining produced an average surface roughness of 0.2 μm. A re-deposited layer of 7 μm and a hardened layer of 70 μm were also resulted from the machining.
متن کاملBiodegradable Polymers
In the recent years, bio-based and biodegradable products have raised great interest since sustainable development policies tend to expand with the decreasing reserve of fossil fuel and the growing concern for the environment. These polymers bring a significant contribution to the sustainable development in view of the wider range of disposal options with minor environmental impact. As a result...
متن کاملBiodegradable Polymers
Biodegradable materials are used in packaging, agriculture, medicine and other areas. In recent years there has been an increase in interest in biodegradable polymers. Two classes of biodegradable polymers can be distinguished: synthetic or natural polymers. There are polymers produced from feedstocks derived either from petroleum resources (non renewable resources) or from biological resources...
متن کاملProcessing microstructure on film by femtosecond laser
Selective laser patterning of thin films in a multilayer film is an emerging technology for fabrication of MEMS devices. A 775 nm Ti:sapphire laser (130 fs, 1 kHZ) was used to irradiate the thin film stacks with variations in process parameters such as feed rate and numerical aperture of objective lens. Femtosecond laser patterning of Au/Cr films which have the same thickness of about 1000 nm a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2018
ISSN: 2076-3417
DOI: 10.3390/app8071123