Femtosecond Laser Fabricated Elastomeric Superhydrophobic Surface with Stretching-Enhanced Water Repellency

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surface-enhanced Raman scattering microchip fabricated by femtosecond laser.

We report a surface-enhanced Raman scattering (SERS) microchip that is capable of measuring SERS signals of liquid samples with high sensitivity. The microdevice is an integration of a silicon-based SERS substrate, a multimode optical fiber (MMF), and a microchannel embedded in the photosensitive glass fabricated by the femtosecond laser followed by thermal treatment, wet etching, and annealing...

متن کامل

Nanostructured substrate with nanoparticles fabricated by femtosecond laser for surface-enhanced Raman scattering

A simple and fast method to fabricate nanostructured substrates with silver nanoparticles over a large area for surface-enhanced Raman scattering (SERS) is reported. The method involves two steps: 1) dip the substrate into a silver nitrate solution for a few minutes, remove the substrate from the solution, and then air dry and 2) process the silver nitrate coated substrate by femtosecond (fs) l...

متن کامل

Surface-Enhanced Raman Scattering Sensor on an Optical Fiber Probe Fabricated with a Femtosecond Laser

A novel fabrication method for surface-enhanced Raman scattering (SERS) sensors that used a fast femtosecond (fs) laser scanning process to etch uniform patterns and structures on the endface of a fused silica optical fiber, which is then coated with a thin layer of silver through thermal evaporation is presented. A high quality SERS signal was detected on the patterned surface using a Rhodamin...

متن کامل

Femtosecond and nanosecond laser fabricated substrate for surface-enhanced Raman scattering.

We report a simple and repeatable method for fabricating a large-area substrate for surface-enhanced Raman scattering. The substrate was processed by three steps: (i) femtosecond (fs) laser micromachining and roughening, (ii) thin-film coating, and (iii) nanosecond laser heating and melting. Numerous gold nanoparticles of various sizes were created on the surface of the silicon substrate. The 3...

متن کامل

Femtosecond laser induced hierarchical ZnO superhydrophobic surfaces with switchable wettability.

A simple and one-step method to form a rough ZnO layer consisting of micro/nanoscale hierarchical structures via direct femtosecond laser ablation of the Zn surface is reported for the first time. The resultant surfaces show switchable wettability between superhydrophobicity and quasi-superhydrophilicity via alternate UV irradiation and dark storage.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Nanoscale Research Letters

سال: 2019

ISSN: 1931-7573,1556-276X

DOI: 10.1186/s11671-019-3140-6