FEM Modelling of Lateral-Torsional Buckling Using Shell and Solid Elements
نویسندگان
چکیده
منابع مشابه
The effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...
متن کاملStatic, free vibration and buckling analyses of stiffened plates by CS-FEM-DSG3 using triangular elements
The paper presents the static, free vibration and buckling analyses of eccentrically stiffened plates by the cell-based smoothed discrete shear gap method (CS-FEM-DSG3) using triangular elements. In this method, the original plate element CS-DSG3 is combined with a membrane element and stiffened by a thick beam element. The eccentricity between the plate and the beam is included in the formulat...
متن کاملLateral Torsional Buckling of Steel Thin-Walled Beams with Lateral Restraints
Metal thin-walled members have been widely used in building industry. Usually they are utilized as purlins, girts or ceiling beams. Due to slenderness of thin-walled cross-sections these structural members are prone to stability problems (e.g. flexural buckling, lateral torsional buckling). If buckling is not constructionally prevented their resistance is limited by buckling strength. In practi...
متن کاملBuckling resistance of solid shell bubbles under ultrasound.
Thin solid shell contrast agents bubbles are expected to undergo different volume oscillating behaviors when the acoustic power is increased: small oscillations when the shell remains spherical, and large oscillations when the shell buckles. Contrary to bubbles covered with thin lipidic monolayers that buckle as soon as compressed: the solid shell bubbles resist compression, making the buckling...
متن کاملModelling of Random Geometrical Imperfections and Reliability Calculations for Thin Cylindrical Shell Subjected to Lateral Pressure
It is well known that it is very difficult to manufacture perfect thin cylindrical shell. Initial geometrical imperfections existing in the shell structure is one of the main determining factor for load bearing capacity of thin cylindrical shell under uniform lateral pressure. As these imperfections are random, the strength of same size cylindrical shell will also random and a statistical metho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.05.365