FECO-based observations of birefringence at normal incidence in optical coatings
نویسندگان
چکیده
منابع مشابه
FECO-based observations of birefringence at normal incidence in optical coatings.
I. J. Hodgkinson is with University of Otago, Physics De partment, Dunedin, New Zealand; F. Horowitz is with In stitute de Fisica, Universidade Federal do Rio Grande do Sul, 90 000-Porto Alegre-RS, Brazil; H. A. Macleod is with University of Arizona, Optical Sciences Center, Tucson, Arizona 85721; M. Sikkens is with University of Groningen, Department of Applied Physics, Nyenborgh 18, 9747 A6...
متن کاملBirefringence of interferential mirrors at normal incidence Experimental and computational study
In this paper we present a review of the existing data on interferential mirror birefringence. We also report new measurements of two sets of mirrors that confirm that mirror phase retardation per reflection decreases when mirror reflectivity increases. We finally developed a computational code to calculate the expected phase retardation per reflection as a function of the total number of layer...
متن کاملBirefringence in Optical Fibers: Applications
As discussed in the previous chapter, the so-called single-mode fibers in fact support two modes simultaneously, which are orthogonally polarized. In an ideal circular-core fiber, these two modes will propagate with the same phase velocity; however, practical fibers are not perfectly circularly symmetric. As a result, the two modes propagate with slightly different phase and group velocities. F...
متن کاملBirefringence of GaNÕAlGaN optical waveguides
We have experimentally studied the birefringence of wurtzite GaN grown on a sapphire substrate. The measurements were done with single-mode GaN/AlGaN planar optical waveguides on c-plane grown heterostructure films. The refractive indices were found to be different for signal optical field perpendicular or parallel to the crystal c axis (n'Þn i). More importantly, we found an approximately 10% ...
متن کاملMagnetic domain observations in a FeCo-based nanocrystalline alloy by Lorentz microscopy
Lorentz microscopy was used to investigate the domain structure in an Fe0.5Co0.5 80Nb4B13Ge2Cu1 alloy annealed at 500, 550, and 610 °C, respectively, for 1 h. The average grain size d, observed by conventional transmission electron microscopy, is 10 nm for the alloy annealed at 500 °C, 18 nm for 550 °C, and 90 nm for 610 °C. The domain structure of sample annealed at 500 °C exhibits few pinning...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Optics
سال: 1985
ISSN: 0003-6935,1539-4522
DOI: 10.1364/ao.24.001568