Feasible Evaluations of Coupled Multilayered Chip Inductor for POL Converters
نویسندگان
چکیده
منابع مشابه
Coupled Inductor Design Optimization for Fast-Response Low-Voltage DC-DC Converters
Multiphase voltage regulator modules (VRMs) for microprocessor power delivery with coupled output inductors are discussed. Strong coupling is shown to be feasible and effective at reducing ripple if the correct magnetic topology is used. For more than two phases, this can be a “ladder” core with windings around each rung. Typical ripple reduction is better than a factor of six with no effect on...
متن کاملSingle-Inductor Multiple-Output Switching Converters
A family of singleinductor multiple-output switching converters is presented. They can be classified into same-type, bipolar, and mixed-type converters. Synchronous rectification and control loop design are discussed, and experimental and simulation results of representative converters are presented to verify the functionality of these converters.
متن کاملSingle-inductor Multiple-output Dc-dc Converters
This chapter deals with the design methodologies to obtain DC-DC converters with multiple outputs and only one inductor. The four possible schemes, buck, boost, and inverting or noninverting buck-boost, are considered. The key specific problems related to the issue are the inductor current switching scheme, the multiple-loops control, the suitable driving of power switches and, accordingly, the...
متن کاملAutomatic Tuning of Coupled Inductor Filters
A coupled inductor filter is presented with interesting notch mode filtering characteristics. Although this configuration has been long established, it has received little attention recently. The new contribution of this paper is to provide an automatic tuning process that can make use of the frequency domain characteristics of the coupled inductor building block. In a sense, this becomes an a...
متن کاملNew Coupled-Inductor Based Multilevel Inverter with Extension Capability
Multilevel inverters have been developed due to limitations of the conventional two-level voltage source inverters (VSIs). Most of the topologies of multilevel inverters that have been presented in the literature are based on the sharing of the rated voltage between the switches so that the switches with lower voltage ratings can be used. In these topologies, the current rating of all of the sw...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Journal of Industry Applications
سال: 2015
ISSN: 2187-1094,2187-1108
DOI: 10.1541/ieejjia.4.126