Feasibility Study of High-Average-Power Lasers for Laser-Driven Neutron Sources

Faraday Isolators for High Average Power Lasers

The average power of solid-state and fiber lasers has considerably increased during the last ten years. The 10 kW power is not record-breaking any longer, and a topical problem nowadays is to create lasers with a power of 100 kW. Therefore, the study of thermal effects caused by absorption of laser radiation in the bulk of optical elements becomes ever more important. The Faraday isolator (FI) ...

Development of high average power fiber lasers for advanced accelerators 


Discharge technology for excimer lasers of high average power

The self-sustained discharge of excimers is analyzed. Several excitation schemes that have been successfully applied are compared. For high repetition rate operation not only the discharge stability and its efficiency are important selection criteria but more important is the potential of fast discharge switching with minimum pulse energy. Pulse compression plays a key role in the laser perform...

Technical approaches for high-average-power free-electron lasers

Free-electron-laser (FEL) oscillators have only recently achieved their original promise as producers of high-power, short-wavelength, tunable radiation. Room-temperature accelerator systems have generally had limited duty factor due to excessive Ohmic losses on cavity walls. The application of superconducting radio-frequency (SRF) technology has now permitted an increase by more than two order...

High-Power Green Laser Sources

To access the green spectral range for display applications, high-power optically pumped semiconductor disk lasers (OPSDLs) in combination with second-harmonic generation have been realized. A frequency-doubled output exceeding 9.5W is achieved at a wavelength of 520 nm. The wavelength of these devices can be tuned over a rather broad range of more than 20 nm in the second-harmonic regime. In t...