FE-Simulations of a Direct Wall Shear Box Test
نویسندگان
چکیده
منابع مشابه
Three-Dimensional Discrete Element Simulations of Direct Shear Tests
Using discrete element methods, geotechnical engineers can create “virtual laboratories” to simulate conventional laboratory tests. In this study, three-dimensional DEM simulations of direct shear tests are coupled with equivalent physical tests on steel balls. The macro-scale response of simulations is compared with the physical test results to validate the discrete element model and to gain i...
متن کاملStudying the effect of roughness on soil-geotextile interaction in direct shear test
Abstract One of the methods of increasing soil resistance against failure is soil reinforcement using geosynthetics. Soil-geosynthetic interactions are of great importance and are affected by friction and adhesion at their interface. Soil gradation, contact surface roughness and geotextile density are among the factors affecting soil-geotextiles interaction this study, to investigate the eff...
متن کاملNumerical Discrete Element Simulation Of Soil Direct Shear Test
One of the most common methods to measure soil mechanical properties (namely cohesion and internal friction angle) is direct shear box test. In this paper the development of a three-dimensional (3D) discrete element soil model for simulation of a cohesive soil’s direct shear test is presented. The aim was to calibrate the properties of the Hertz-Mindlin with bonding contact model available in E...
متن کاملWorking Principle Simulations of a Dynamic Resonant Wall Shear Stress Sensor Concept
This paper discusses a novel dynamic resonant wall shear stress sensor concept based on an oscillating sensor operating near resonance. The interaction between the oscillating sensor surface and the fluid above it is modelled using the unsteady laminar boundary layer equations. The numerical experiment shows that the effect of the oscillating shear stress is well correlated by the Hummer number...
متن کاملDirect measurement of wall shear stress in a reattaching flow with a photonic sensor
Wall shear stress measurements are carried out in a planar backward-facing step flow using a micro-optical sensor. The sensor is essentially a floating element system and measures the shear stress directly. The transduction method to measure the floating element deflection is based on the whispering gallery optical mode (WGM) shifts of a dielectric microsphere. This method is capable of measuri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Soils and Foundations
سال: 2004
ISSN: 0038-0806
DOI: 10.3208/sandf.44.4_67