FE Modeling of Strain Localization in Soft Rock
نویسندگان
چکیده
منابع مشابه
three-dimensional modeling of strain localization in cosserat continuum theory
in this paper, a higher order continuum model is presented based on the cosserat continuum theory in 3d numerical simulation of shear band localization. as the classical continuum models suffer from the pathological mesh-dependence in strain softening models, the governing equations are regularized by adding the rotational degrees-of-freedom to conventional degrees-of-freedom. the fundamental r...
متن کاملObjective modeling of strain localization
ABSTRACT. This paper provides an elementary introduction into modeling of localized inelastic processes such as cracking or formation of shear bands. The basic concepts are explained using a simple one-dimensional example. It is shown that a stress-strain law with softening used in a standard continuum description leads to physically meaningless results and that the numerical solution suffers b...
متن کاملFabrication of Soft Magnetic Fe-based Nanoalloy
The Fe-Ni-Sb-B amorphous alloy has been prepared by a solid-solid chemical reaction of ferric trichloride, nickel chloride, antimony chloride and potassium borohydride powders at room temperature. The inductive couple plasma study indicates that the resultant is composed of Fe 5.38 %, Ni 56.19 %, Sb 29.02 % and B 0.44 %. The XRD and thermal analysis show that the alloy is a non-strict sense amo...
متن کاملRock mechanics modeling based on soft granulation theory
This paper describes application of information granulation theory, on the design of rock engineering flowcharts. Firstly, an overall flowchart, based on information granulation theory has been highlighted. Information granulation theory, in crisp (non-fuzzy) or fuzzy format, can take into account engineering experiences (especially in fuzzy shape-incomplete information or superfluous), or engi...
متن کاملShear Localization due to Strain Softening in Side Pressed Cylinders
In this paper, shear localization due to strain softening in sidepressed cylinders, is inverstigated. Shear localization causes formation of macroscopic shear bands which can be obsserved in the metallographic cross-section. In this paper, for the first time a method is presented in which a simple two-slice model is used to study the formation of shear bands. The results obtained form this mode...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Geotechnical and Geoenvironmental Engineering
سال: 2000
ISSN: 1090-0241,1943-5606
DOI: 10.1061/(asce)1090-0241(2000)126:4(335)