Fe-Mn(Al, Si) TWIP steel – strengthening characteristics and weldability
نویسندگان
چکیده
منابع مشابه
Magnetic properties of Fe-doped MnAl
Electronic and magnetic properties of L10-ordered FexMn1−xAl alloys (x=0, 0.0625, 0.125, 0.1875, 0.5) are investigated by first-principle supercell calculations. Pristine MnAl exhibits robust ferromagnetism involving the dense-packed Mn atoms in (001) planes of the tetragonal structure. Iron substitution for Mn significantly deteriorates the magnetization of the alloy. The reduction is a...
متن کاملWeldability Investigation of Fine-grained S1100ql Steel
I. Samardžić, Faculty of Mechanical Engineering Slavonski Brod, Croatia, A. Ćorić, Bratstvo, Novi Travnik, Bosnia and Herzegovina, M. Dunđer, Department for Polytechnic, University of Rijeka, Croatia. This paper presents the results of weldability investigation on welded joints made of fine grained high-strength S1100QL steel. The investigations are performed on two welded plates by HV 10 hardn...
متن کاملSecondary recrystallization characteristics of 3%Si grain-oriented electrical steel
A secondary recrystallization Lab study focusing on the secondary recrystallization temperature and magnetic properties was carried out on cold rolling industrial samples of 3%Si grain-oriented electrical steel produced by low slab reheating temperature technology. The results showed a secondary recrystallization temperature, determined by the observed grain size change, of 1080 C with annealin...
متن کاملMechanical behaviour of TWIP steel under shear loading
Twinning induced plasticity steels (TWIP) are very good candidate for automotive industry applications because they potentially offer large energy absorption before failure due to their exceptional strain hardening capability and high strength. However, their behaviour is drastically influenced by the loading conditions. In this work, the mechanical behaviour of a TWIP steel sheet sample was in...
متن کاملTwin-Induced Plasticity of an ECAP-Processed TWIP Steel
The TWIP steels show high strain hardening rates with high ductility which results in high ultimate tensile strength. This makes their processing by equal channel angular pressing very difficult. Up to now, this has only been achieved at warm temperatures (above 200 C). In this paper, a FeMnCAl TWIP steel has been processed at room temperature and the resulted microstructure and mechanical prop...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2017
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/179/1/012057