Fatigue Tests of Metals under Repeated Bending Stresses with Varying Mean Bending Stresses
نویسندگان
چکیده
منابع مشابه
Detection of Bending Stresses in Buried Pipelines
When gas or oil pipelines must be laid through sand or permafrost or other unstable soils, the pipe walls can he subjected to large bending loads if the soil shifts. In order to detect this condition and correct it, it would be useful to monitor the state of stress along the pipeline'at regular time intervals using a vehicle that is moved through the line by the fluid or gas in it. The experime...
متن کاملAnalysis of Bending Stresses in Cantilever Type Suction Valve Reeds
Design techniques are described which allow prediction of bending stresses in reed valves from theoretical and experimental data. Their application is to aid the development of more durable valves. A relatively simple analysis is described which permits valve stresses and impact velocities to be estimated from the initial pressure drop across a valve reed. (Conversely, experimental measurement ...
متن کاملMicro-Raman Measurement of Bending Stresses in Micromachined Silicon Flexures
Micron-scale characterization of mechanical stresses is essential for the successful design and operation of many micromachined devices. Here we report the use of Raman spectroscopy to measure the bending stresses in deep reactive-ion etched silicon flexures with a stress resolution of 10 MPa and spatial resolution of 1 m. The accuracy of the technique, as assessed by comparison to analytical a...
متن کاملAnalysis of Thermal-Bending Stresses in a Simply Supported Annular Sector Plate
The present article deals with the analysis of thermal-bending stresses in a heated thin annular sector plate with simply supported boundary condition under transient temperature distribution using Berger’s approximate methods. The sectional heat supply is on the top face of the plate whereas the bottom face is kept at zero temperature. In this study, the solution of heat conduction is obtained...
متن کاملFour-point bending evaluation of dentin-composite interfaces with various stresses.
UNLABELLED Fracture properties of composite-dentin beams bonded with a self-etching adhesive were tested following short term pretreatments to simulate potential degradation mechanisms (thermal cycling, immersion in 5% NaOCl, or fatigue cycling). Beams of rectangular cross-section were shaped to a size of approximately 0.87 x 0.87 x 10 mm and placed in a four-point bending apparatus, with the l...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1964
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.13.270