Fatigue Test of Basalt Fiber and Polypropylene Fiber Soil-Cement
نویسندگان
چکیده
Cement-soil is a common method to strengthen soft soil foundation. In engineering construction, certain amount of fiber often added improve its mechanical properties. order evaluate the fatigue damage properties soil-cement materials under cyclic loading, basalt and polypropylene were into in this experiment carry out material test loading. The results show that compared with plain soil-cement, anti-fatigue ability significantly enhanced. Under condition same incorporation ratio, improved than fiber. load level, higher cement ratio is, greater strength more cycles failure are. log-linear relationship between stress level life obtained through test, which can be used calculate times different levels.
منابع مشابه
Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملAccelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites
One of the greatest impediments to use polymer-matrix composites is their susceptibility to degradation when exposed to the elevated temperatures and the limited knowledge on the thermal and mechanical properties of these composites at such temperatures. The objective of this study is to evaluate the effects of accelerated heat aging on the tensile properties of the Woven Basalt/Phenolic (WBP) ...
متن کاملAn Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene
Abstract Fiber-metal laminates (FMLs) are new type of composite materials which could improve defects of traditional composites in ductility, formability, impact and damage tolerance. Drawing behavior of a thermoplastic based FML was investigated consisting of glass-fiber reinforced polypropylene composite laminate and aluminum AA1200-O as the core and skin layers, respectively. The effects o...
متن کاملFiber Microstructure and Fatigue
Strong fibers can fail at low stresses under cyclic loading. This phenomenon, which is called cyclic fatigue, occurs to an unexplained extent only when part (or all) of the fiber is compressed or twisted for some fraction of the strain cycle. Industrial yarns used in rubber, a 2 MMM lb. annual market in which USA fiber producers are highly competitive, must retain a maximum fraction of their in...
متن کاملReinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber
The aim of this study was to synthesis of glass ionomer-silk fiber composite and to evaluate the effect of adding natural degummed silk fiber on the mechanical properties of glass ionomer cement (GIC). For this purpose, natural degummed silk fibers with 1 mm in length and 13-16 µm in diameter were added to the ceramic component of a commercial glass ionomer cement in 1, 3 and 5 wt. %. Compressi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in transdisciplinary engineering
سال: 2022
ISSN: ['2352-751X', '2352-7528']
DOI: https://doi.org/10.3233/atde220945