Fatigue Resistance of 01420 S Alloy Welded Joints Made by Various Welding Methods
نویسندگان
چکیده
Fatigue characteristics of welded joints alloy 01420C made by resistance spot welding and automatic argon arc are obtained. The highest durability was shown with a longitudinal weld. Joints Produced simulating the edge line reinforced element have comparable to an unloaded weld spot, which in turn is inferior joint elements limited cross-section repair mechanical cut similar standard sample form strip hole.
منابع مشابه
Fatigue Life of Repaired Welded Tubular Joints
In this study, the effect of repair on fatigue life of tubular joints is investigated. Six cracked specimens precedently subjected to fatigue loading undergone to weld repair. Two of those specimens were shot peened before primary fatigue loading. It is shown that repair gives rise to about 150% increase in fatigue life for original specimens while the increase of fatigue life for shot-peened ...
متن کاملImproving Fatigue Strength of Welded Joints by Ultrasonic Impact Treatment
Enhancement in fatigue performance of welded joints by Ultrasonic Impact Treatment (UIT) was evaluated with large-scale rolled beam and built-up specimens having yield strength of 345 to 760 MPa. Eighteen rolled-beam specimens having welded details at cover plates and transverse stiffeners and eight built-up specimens having only transverse stiffener details were fatigue tested after treating t...
متن کاملevaluation of fatigue life of friction stir welded 7075-t651 aluminum alloy joints
abstract – aluminium 7075- t651 alloys are widely used in the production of light weight structures requiring a high strength to weight ratio and high corrosion resistance. the effect of processing parameters on fatigue life of 7075- t651 aluminium joints produced by friction stir welding was investigated in the present study. welding samples were made by employing rotating tool speed of 770, 9...
متن کاملImprovement in Fatigue Performance of Aluminium Alloy Welded Joints by Laser Shock Peening in a Dynamic Strain Aging Temperature Regime
As a new treatment process after welding, the process parameters of laser shock peening (LSP) in dynamic strain aging (DSA) temperature regimes can be precisely controlled, and the process is a non-contact one. The effects of LSP at elevated temperatures on the distribution of the surface residual stress of AA6061-T6 welded joints were investigated by using X-ray diffraction technology with the...
متن کاملEstimation of fatigue S-N curves of welded joints using advanced probabilistic approach
This paper provides a new advanced probabilistic approach for reliable estimation of the fatigue characteristic S-N curves of welded joints both for constant amplitude (CA) and variable amplitude (VA) loading conditions. The presented approach, which is referred to as the ML-MCS approach, combines Maximum Likelihood method (ML) and Monte-Carlo Simulations (MCS) method to estimate true p-quantil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC web of conferences
سال: 2021
ISSN: ['2261-236X', '2274-7214']
DOI: https://doi.org/10.1051/matecconf/202134601013