Fatigue Property of Intermetallic Compound TiAl alloy Coated with ZrO2 and CoNiCrAlY at Elevated Temperature.
نویسندگان
چکیده
منابع مشابه
HIGH-TEMPERATURE FRACTURE AND FATIGUE RESISTANCE OF A DUCTILE b-TiNb REINFORCED g-TiAl INTERMETALLIC COMPOSITE
ÐThe high-temperature fatigue-crack propagation and fracture resistance of a model g-TiAl intermetallic composite reinforced with 20 vol.% ductile b-TiNb particles is examined at elevated temperatures of 650 and 8008C and compared with behavior at room temperature. TiNb reinforcements are found to enhance the fracture toughness of g-TiAl, even at high temperatures, from about 12 to 040 MPa m, a...
متن کاملPERGAMON BEHAVIOR OF GAMMA TiAl SUBJECTED TO IMPACT DAMAGE AND ELEVATED TEMPERATURE FATIGUE
Gamma titanium aluminide has received significant attention in recent years as a candidate material for use in aerospace and industrial gas turbine engine applications. In particular, these materials offer significant weight reductions (densities are less than half that of nickel-based superalloys), high specific strength retention at elevated temperature and high specific stiffness which is pa...
متن کاملEvaluation of a Threshold-based Model of the Elevated- Temperature Fatigue of Impact-Damaged � -TiAl
Step-loading fatigue tests have been conducted on two � -TiAl alloys with differing microstructures following quasi-static indentations intended to simulate assembly-related impact damage to lowpressure turbine blades. Fatigue tests were conducted at 600 �C using computer-controlled servohydrau lic loading at a frequency of 20 Hz. Reasonably good agreement was achieved between the fatigue data...
متن کاملROOM TEMPERATURE FATIGUE RESPONSE OF �-TiAl TO IMPACT DAMAGE
Gamma based titanium aluminides have received considerable attention recently as candidate materials in gas turbine applications, particularly low pressure turbine blades (1–3). Their low density and high specific stiffness, result in potentially significant weight savings in structures such as gas turbine engines if substituted for current materials. Two �-TiAl microstructures are predominatel...
متن کاملProperties of Low-alloy High-speed Steel at Elevated Temperature
J. Jaworski, T. Trzepieciński: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Rzeszów, Poland This paper presents the results of research on the determination of the coefficient of thermal conductivity and hot hardness of cutters made of selected grades of low-alloy high-speed steels, HS 6-5-2 and HS3-1-2. The investigations of hot hardness and yield stress...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1999
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.65.55