Fatigue Properties of GFRP Single Lap Joints
نویسندگان
چکیده
منابع مشابه
Fatigue behaviour of composite adhesive lap joints
This paper is concerned with a fatigue study of composite adhesive lap joints produced from a bi-directional woven E-glass fibres and polypropylene. The adhesive used was a Bostik 7452 (Rubber & Plastics Grade) ethyl cyanoacrylate type. The effects of layer orientation, lap joint length and water immersion on the fatigue behaviour were studied. The specimens were immersed in water during period...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملSemi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints
A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...
متن کاملEvaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملMixed mode fatigue growth of curved cracks emanating from fastener holes in aircraft lap joints
The ®nite element alternating method is extended further for analyzing multiple arbitrarily curved cracks in an isotropic plate under plane stress loading. The required analytical solution for an arbitrarily curved crack in an in®nite isotropic plate is obtained by solving the integral equations formulated by Cheung and Chen (1987a, b). With the proposed method several example problems are solv...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Composite Materials
سال: 1993
ISSN: 0385-2563
DOI: 10.6089/jscm.19.216