Fatigue Performance of Hybrid Steel Samples with Laser Sintered Implants

Mechanism of fatigue performance enhancement in a laser sintered superhard nanoparticles reinforced nanocomposite followed by laser shock peening

Evaluating the Seismic Performance of Steel-SMA Hybrid Braces

The seismic performance of hybrid braces composed of steel and shape memory alloy (SMA) was investigated in this paper. Six types of hybrid braces were used, constituted by SMA content of 0, 20, 40, 60, 80, and 100%. A nonlinear dynamic analysis was performed under El Centro earthquake records, with the maximum acceleration of 0.6g and 0.9g. Our results showed that the seismic performance, i.e....

Fatigue Performance of Forged Steel and Ductile Cast Iron Crankshafts

Fatigue is the primary cause of failure of crankshafts in internal combustion engines. The cyclic loading conditions and the stress concentrations in the crank pin fillets are unavoidable, and can result in fatigue failure. The objectives of this study were to compare the fatigue behavior of forged steel and ductile iron crankshafts from a one-cylinder engine as well as to determine if the fati...

Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418

In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...

Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418

In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...