Fatigue life analysis of bolt joints with use of ANSYS software
نویسندگان
چکیده
منابع مشابه
Fatigue Life of Repaired Welded Tubular Joints
In this study, the effect of repair on fatigue life of tubular joints is investigated. Six cracked specimens precedently subjected to fatigue loading undergone to weld repair. Two of those specimens were shot peened before primary fatigue loading. It is shown that repair gives rise to about 150% increase in fatigue life for original specimens while the increase of fatigue life for shot-peened ...
متن کاملFatigue Life Prediction of Rivet Joints
Strength reduction in structures like an aircraft could be resulted as cyclic loads over a period of time and is an important factor for structural life prediction. Service loads are emphasized at the regions of stress concentration, mostly at the connection of components. The initial flaw prompting the service life was expected by using the Equivalent Initial Flaw Size (EIFS) which has been re...
متن کاملEvaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملcomparative analysis of the use of hedges & emphatics in english and persian academic research articles of sociology & psychology
چکیده ندارد.
15 صفحه اولStatic Strength Analysis of Tubular T-Joints Using Ansys
A Finite element analysis has been done using ANSYS, to study the static strength of an offshore tubular T-joint. The strength of T-tubular joints with circular cross section tube chord with circular cross section tube brace is investigated. To determine the joint strength of these T-joint subjected to tension, compression, in -plane bending and out-of-plane bending loading cases have been carr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanik
سال: 2018
ISSN: 0025-6552
DOI: 10.17814/mechanik.2018.7.96