Fatigue delamination experiments on GFRP and CFRP specimens under single and mixed fracture modes
نویسندگان
چکیده
منابع مشابه
Multi-spot Laser Scanning Thermography for Delamination Inspection GFRP Structure in CFRP/GFRP Structure
In this study, a multi-spot laser scanning thermography (MLST) system is developed for automated, rapid and long-range inspection of delamination in composite structures. First, thermal waves are generated by scanning a multi-spot laser beam over a target composite structure, and the corresponding thermal waves are measured by using an infrared (IR) camera. Then a thermal image processing algor...
متن کاملMixed Modes Fracture and Fatigue Evaluation for Lithium-ion Batteries
Lithium ion batteries have become a widely known commodity for satisfying the world’s mobile energy storage needs. But these needs are becoming increasingly important, especially in the transportation industry, as concern for rising oil prices and environmental impact from fossil fuels are pushing for deployment of more electric vehicles (EV) or plug in hybrid-electric vehicles (PHEV) and renew...
متن کاملNumerical Simulations and Experimental Investigations on Quasi-Static and Cyclic Mixed Mode Delamination of Multidirectional CFRP Laminates
vi
متن کامل3D Mixed-Mode Delamination Fracture Criteria–An Experimentalist’s Perspective
Many delamination failure criteria based on fracture toughness have been suggested over the past few decades, but most only covered the region containing mode I and mode II components of loading because that is where toughness data existed. With new analysis tools, more 3D analyses are being conducted that capture a mode III component of loading. This has increased the need for a fracture crite...
متن کاملExperimental and Theoretical Research on the Compression Performance of CFRP Sheet Confined GFRP Short Pipe
The axial compressive strength of unidirectional FRP made by pultrusion is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. A theoretical iterative calculation approach was suggested to predict the ultimate axial compressive stress of the combined structure and analyze the influences of geometr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.04.298