Fatigue Damage Process of Spheroidal Graphite Cast Iron Under Rotating Bending Cyclic Loading.

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Assessment of different methods for fatigue life prediction of steel in rotating bending and axial loading

Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (­high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...

متن کامل

Cumulative Fatigue Damage Under stepwise Tension-Compression Loading

Rock structures are subjected to cyclic tension-compression loading due to a blasting, earthquake, traffic and injection-production in underground storage case. Therefore study the fatigue behavior of rock samples under this type of loading is required. In this study, the accumulated fatigue damage for a Green Onyx rock sample which consisted of only one mineral composition with two-step high-l...

متن کامل

On the Effect of Pouring Temperature on Spheroidal Graphite Cast Iron Solidification

This work is focused on the effect of pouring temperature on the thermal-microstructural response of an eutectic spheroidal graphite cast iron (SGCI). To this end, experiments as well as numerical simulations were carried out. Solidification tests in a wedge-like part were cast at two different pouring temperatures. Five specific locations exhibiting distinct cooling rates along the sample were...

متن کامل

Damage evolution in compacted graphite iron during thermomechanical fatigue testing

Thermomechanical fatigue properties of a compacted graphite iron in an out of phase configuration are investigated for different maximum temperatures and mechanical strain ranges. Furthermore, the stress-strain hysteresis loops are analysed and in particular the unloading modulus, i.e. the elastic modulus measured during specimen unloading, is obtained from each cycle. This material parameter h...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A

سال: 1993

ISSN: 0387-5008,1884-8338

DOI: 10.1299/kikaia.59.722