Fatigue Crack Propagation in Low-Carbon Steel under Doubly-Repeated Stress

Influence of Residual Stress Field on the Fatigue Crack Propagation in Prestressing Steel Wires

This paper deals with the effect of several residual stress profiles on the fatigue crack propagation in prestressing steel wires subjected to tension loading or bending moment. To this end, a computer program was developed to evaluate the crack front evolution on the basis of the Walker law. Results demonstrate that the absence of residual stresses makes the crack propagate towards a preferent...

Crack propagation and fracture in silicon wafers under thermal stress

The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a cr...

Fatigue crack propagation in microcapsule - toughened epoxy

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...

High Temperature Fatigue Crack Propagation in INCONEL718

Stochastic modeling of fatigue crack propagation

This paper presents a stochastic model of fatigue-induced crack propagation in metallic materials. The crack growth rate predicted by the model is guaranteed to be non-negative. The model structure is built upon the underlying principle of Karhunen±Lo eve expansion and does not require solutions of stochastic di€erential equations in either Wiener integral or Itô integral setting. As such this ...