Fatigue Characterization of NiTiCu Shape Memory Alloys
نویسندگان
چکیده
منابع مشابه
Fatigue Crack Growth Fundamentals in Shape Memory Alloys
In this study, based on a regression of the crack tip displacements, the stress intensity range in fatigue is quantitatively determined for the shape memory alloy Ni2FeGa. The results are compared to the calculated stress intensity ranges with a micro-mechanical analysis accounting for the transformation-induced tractions. The effective stress intensity ranges obtained with both methods are in ...
متن کاملApplication of Shape Memory Alloys in Seismic Isolation: A Review
In the last two decades, there has been an increasing interest in structural engineering control methods. Shape memory alloys and seismic isolation systems are examples of passive control systems that use of any one alone, effectively improve the seismic performance of the structure. Characteristics such as large strain range without any residual deformation, high damping capacity, excellent re...
متن کاملShape Memory Alloys
THE TERM SHAPE MEMORY ALLOYS (SMA) is applied to that group of metallic materials that demonstrate the ability to return to some previously defined shape or size when subjected to the appropriate thermal procedure. Generally, these materials can be plastically deformed at some relatively low temperature, and upon exposure to some higher temperature will return to their shape prior to the deform...
متن کاملCharacterization of smart MARFOS NiTi shape memory alloys
In the present study, structural characterization of NiTi smart shape memory alloys (SMAs), produced by an alternative powder metallurgy approach named mechanically activated reactive forging (MARFOS), was carried out by means of transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). It was observed that MARFOS materials had a multiphase nanocrys...
متن کاملConfirming the Composition of Shape Memory Alloys by Microstructural Characterization
It is well known that the properties of shape memory alloys, such as binary Ni-Ti (nitinol), are very sensitive to composition.[1-3] Especially on the Ni-rich side of stoichiometry, the martensite/austenite phase transformation temperature decreases abruptly when Ni is increased only a few tenths of a weight percent.[4] In ternary high temperature shape memory alloys (HTSMAs) containing Pt, Pd,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Safety
سال: 2014
ISSN: 1738-3803
DOI: 10.14346/jkosos.2014.29.4.028