Fatigue Behaviour of Silicon Carbide and Fly Ash Dispersion Strengthened High Performance Hybrid Al 5083 Metal Matrix Composites
نویسندگان
چکیده
منابع مشابه
Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy
Excellent mechanical properties and fatigue performance of Al/Al2O3 metal-based nanocomposites caused to introduce this material as a good candidate for various applications. In this regard, the preparation and characterization of this composite can be considered as a hot issue for research. The study was carried out in several steps including: (i) preparation of Al/Al2O3 metal-based nanocompos...
متن کاملImproved Mechanical and Tribological Properties of Metal-Matrix Composites Dispersion-Strengthened by Nanoparticles
Coand Fe-based alloys produced by powder technology are being widely used as a matrix for diamond-containing composites in cutting, drilling, grinding pplications, etc. The severe service conditions demand that the mechanical and tribological properties of these alloys be improved. Development of metal-matrix composites (MMCs) and alloys reinforced with nanoparticles is a promising way to resol...
متن کاملExperimental study of fracture mechanics in the aluminum matrix composites containing Fifteen percent silicon carbide particles
In this investigation ‚the fracture toughness of A356 containing15%SiC composite was studied. Al/SiC composites have been considered because of their mechanical and erosion properties .Low fracture toughness in Al/SiC as compared with Aluminium alloys is one of its disadvantage. In this study at first A356 alloy was melted in a smelting electrical furnace then poured into the mould. A356-15% Si...
متن کاملEffect of Forging Parameters on Low Cycle Fatigue Behaviour of Al/Basalt Short Fiber Metal Matrix Composites
This paper deals with metal matrix composites (MMCs) of Al 7075 alloy containing different weight percentage (2.5, 5, 7.5, and 10) basalt short fiber reinforcement and unreinforced matrix alloy. The samples were produced by the permanent stir casting technique. The casting ingots were cut into blanks to be forged in single stage and double stage, using MN press and graphite-based lubricant. The...
متن کاملHigh Performance Bricks from Fly Ash
Bricks whose solid ingredient is 100% fly ash have been manufactured. The manufacturing process uses techniques and equipment similar to those used in clay brick factories. The bricks produced were about 28% lighter than clay bricks. The bricks manufactured from fly ash possessed compressive strength higher than 40 MPa. This exceeds some of the best of load carrying clay bricks available by mor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Minerals and Materials Characterization and Engineering
سال: 2017
ISSN: 2327-4077,2327-4085
DOI: 10.4236/jmmce.2017.55023