Fatigue behaviour of Plasma Sprayed Titania and Chromia Coatings

Microstructure and Properties of Plasma Sprayed Nanostructural ZrO2 Coatings

Plasma sprayed zirconia deposits have been employed in wide applications for thermal protection. Recently, the use of nanostructural surface represents an alternative for improving the performance of these coatings. The present paper reviewed the works in this field at our research group, including synthesis of nanostructural ZrO2 powders, influence of spraying parameters on microstructure and ...

Suspension Plasma Sprayed Titanium Oxide and Hydroxyapatite Coatings

The paper aims at development of TiO2, Ca5(PO4)3OH (hydroxyapatite, HA) and their multilayer coatings onto stainless steel, titanium and aluminum substrate using suspension plasma spraying. The total thickness of the coatings was in the range 10 to 150 μm. The suspension on the base of distilled water, ethanol and their mixtures was formulated with the use of fine commercial TiO2 pigment crysta...

Failure analysis of suspension plasma sprayed thermal barrier coatings

Sintering of Fine Particles in Suspension Plasma Sprayed Coatings

Suspension plasma spraying is a process that enables the production of finely grained nanometric or submicrometric coatings. The suspensions are formulated with the use of fine powder particles in water or alcohol with some additives. Subsequently, the suspension is injected into plasma jet and the liquid additives evaporate. The remaining fine solids are molten and subsequently agglomerate or ...

Instrumented spherical micro-indentation of plasma-sprayed coatings

The mechanical response of plasma-sprayed coatings is studied by recourse to instrumented spherical micro-indentation. It is shown that the elastic moduli of the coatings can be determined in a more reliable and reproducible manner with instrumented spherical indentation than prior (Knoop) indentation methods, while at the same time minimizing damage to the coating during indentation. The resul...