Fatigue behaviour of corrosion pits in X65 steel pipelines
نویسندگان
چکیده
منابع مشابه
Probabilistic Pitting Corrosion Risk Assessment of Welded Offshore Steel Pipelines
Steel structures continuously exposed to offshore marine environments are prone to corrosion. This can be of major economic and perhaps of environmental significance. The risk of these scenarios occurring can be assessed using good quality data, good quality corrosion and pitting models and structural reliability assessment. Recently, improved models for the prediction of longer term corrosion ...
متن کاملImpact Fatigue Behaviour of Flapper Valve Steel
The purpose of this study is to discuss the impact fatigue failure mechanism of a suction valve that involves the fracture with fragments torn off from the edge or surface. The shape and dimensions of the test specimen and stopper were made the same as those of the suction valve and stopper in an actual compressor. The specimen was operated by short-duration compressed air pulses, and struck ag...
متن کاملFatigue of Reinforcing Steel Bars Subjected to Natural Corrosion
Under badly environmental conditions as well as complex loads, corrosion of embedded reinforcing steel bars in concrete is common for reinforced concrete (RC) structures. Fatigue of corrosion reinforcing steel bars is a key problem for old RC bridges. To assess the residual fatigue life of aged existing RC bridges, the most new study information on fatigue of natural corrosion reinforcement is ...
متن کاملConsequence of Corrosion on Dynamic Behaviour of Steel Bridge Members
Deterioration of steel bridge infrastructures constitutes a major worldwide problem in transportation engineering and maintenance management industry. Corrosion and fatigue cracking may be the two most important types of damage in aging structures. Various kinds of failures and the need of expensive replacements may occur even though the amount of metal destroyed is quite small. One of the majo...
متن کاملInfluence of Laser Ablation on Stainless Steel Corrosion Behaviour
Laser ablation is the method for material removing from a surface using pulsed lasers. It is used for surface structuring, laser drilling or laser marking. A change of the corrosion behavior of a base material caused by thermal effects during laser processing is an important problem of this technology. Possibilities of surface modification of stainless steel using laser ablation are presented i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
سال: 2018
ISSN: 0954-4062,2041-2983
DOI: 10.1177/0954406218776338