Fatigue Behavior of Solder Joint under Simple Shear Stress.
نویسندگان
چکیده
منابع مشابه
Investigation of the Lead-free Solder Joint Shear Performance
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The purpose of this study is to investigate the effects of reflow profile and thermal shock on the shear performance of eutectic SnPb (SnPb) and Sn3.0Ag0.5Cu (SAC305) solder joints. Test boards were assembled with four different sized surface mount chip resisto...
متن کاملSolder joint reliability under realistic service conditions
The ultimate life of a microelectronics component is often limited by failure of a solder joint due to crack growth through the laminate under a contact pad (cratering), through the intermetallic bond to the pad, or through the solder itself. Whatever the failure mode proper assessments or even relative comparisons of life in service are not possible based on accelerated testing with fixed ampl...
متن کاملSolder Creep-Fatigue Model Parameters for SAC & SnAg Lead-Free Solder Joint Reliability Estimation
For many of the Pb-free solders required under the European RoHS directive, there is now sufficient information, primarily in the form of the results of accelerated thermal cycling of various levels of severity, to develop acceleration models for the creep-fatigue of these solders. In this paper the parameters for the SAC405/305, SAC205, SAC105 and SnAg to replace the parameters for eutectic Sn...
متن کاملReliability Assessment of Preloaded Solder Joint Under Thermal Cycling
The ever increasing power density in modern semiconductor devices requires heat dissipation solution such as heat sink to remove heat away from the device. A compressive loading is usually applied to reduce the interfacial thermal resistance between package and heat sink. In this paper, both experimental approaches and numerical modeling were employed to study the effect of compressive loading ...
متن کاملElectroviscous effects of simple electrolytes under shear
On the basis of a hydrodynamical model analogous to that in critical fluids, we investigate the influences of shear flow upon the electrostatic contribution to the viscosity of binary electrolyte solutions in the Debye-Hückel approximation. Within the linear-response theory, we reproduce the classical limiting law that the excess viscosity is proportional to the square root of the concentration...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1997
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.63.1837