Fatigue Behavior of an Age-Hardened Al-Alloy and Its Statistical Characteristics. Rotating Bending of 6061-T6 Smooth Specimens.
نویسندگان
چکیده
منابع مشابه
The effects of maintaining temperature in annealing heat treatment for an FSWed 6061-T6 Al alloy.
The technological development of all kinds of lightweight transportation devices including vehicles, aircraft, ships, etc. has progressed markedly with the demand for energy saving and environmental protection. Aluminum alloy is in the spotlight as it is a suitable environmentally friendly material. However, deformation is a major problem during the welding process because aluminum alloy has a ...
متن کاملMODELING HIGH TEMPERATURE FLOW BEHAVIOR OF AN AL 6061 ALUMINIUM ALLOY
Hot deformation behavior of a medium Cr/Mn Al6061 aluminum alloy was studied by isothermal compression test at temperatures range of 320 to 480 °C and strain rates range of 0.001 to 0.1 s −1. The true stresstrue strain curves were analyzed to characterize the flow stress of Al6061. Plastic behavior, as a function of both temperature and strain rate for Al6061, was also modeled using a hyperboli...
متن کاملComputational Kinetics Simulation of the Dissolution and Coarsening in the HAZ during Laser Welding of 6061-T6 Al-Alloy
-s 211 WELDING JOURNAL ABSTRACT. Laser beam welding (LBW) has become common practice in the production lines of several industrial sectors including the electronics, domestic appliances, and automotive industries. The advantages of LBW over conventional fusion welding processes (mainly GMAW and GTAW) is the lower welding heat input and smaller weld pool and HAZ dimensions, which are associated ...
متن کاملan inverstigation into the shrinkage behavior (kinetics) of microfilled hybrid and nano dental composites
چکیده ندارد.
15 صفحه اولFeasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1993
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.59.701