Fatigue Assessment Method considering an Effect of Mean Stress
نویسندگان
چکیده
منابع مشابه
Fatigue Life Assessment of Welded Joints Considering Crack Propagation Based on Hot Spot Stress
In this study, fatigue test and crack propagation analysis of welded joints in ships and offshore structures were performed. The test models have two types of welded joints, T-joint and double plate. Test data is presented in S-N curves obtained by the Hot Spot Stress (HSS) approach. The S-N data for each length of crack were appraised to define the fatigue life of crack initiation and propagat...
متن کاملOn the in vitro fatigue behavior of human dentin: effect of mean stress.
Human dentin is susceptible to failure under repetitive cyclic-fatigue loading. This investigation seeks to address the paucity of data that reliably quantify this phenomenon. Specifically, the effect of alternating vs. mean stresses, characterized by the stress- or load-ratio R (ratio of minimum-to-maximum stress), was investigated for three R values (-1, 0.1, and 0.5). Dentin was observed to ...
متن کاملEffect of Mean Stress on Fatigue Crack Growth Behavior of Stainless Steel 304L
Stainless steel has been employed in many engineering applications ranging from pharmaceutical equipment to piping in the nuclear reactors and storage to chemical products. In this attempt, simulation of fatigue crack growth based on experimental results of austenitic stainless steel 304L was presented using AFGROW code when NASGRO mode laws adopted. Double through crack at hole specimen is use...
متن کاملThe Effect of Skinfold on the Assessment of the Mean Power Frequency at the Fatigue Threshold
The purpose of this study was to determine if the amount of subcutaneous tissue over the quadriceps affects the assessment of mean power frequency at the fatigue threshold (MPFFT). It was hypothesized that greater skinfold values will result in lower power outputs associated to the MPFFT. Fourteen adults (Mean ± SD age = 20.7 ± 0.99; body weight = 72.8 ± 12.6 kg) performed an incremental cycle ...
متن کاملMean Stress Effects on Random Fatigue of Nonlinear Structures
Random fatigue analysis techniques have concentrated on linear structures that exhibit symmetric stress range probability density functions (PDF). In narrowband response and broadband random response it is assumed that the bending stress range PDF is symmetric and has zero mean stress. Structures that can exhibit geometrical nonlinearity, under large deflections, typically introduce membrane ef...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Naval Architects of Japan
سال: 2001
ISSN: 1884-2070,0514-8499
DOI: 10.2534/jjasnaoe1968.2001.190_499