Fatigue analysis of injector body based on ANSYS workbench

ANSYS Workbench User's Guide

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...

Component Mode Synthesis in ANSYS Workbench Simulation

At ANSYS Workbench 11.0, the ANSYS Rigid Dynamics add-on module enables users to define joint connections in complex kinematic assemblies. This ability to model rigid and flexible parts in ANSYS Workbench Simulation via joints is beneficial since the rigid parts are modeled with mass and rigid links (that is, rigid contact elements), thus providing load transfer capabilities and allowing users ...

Fatigue Strength Analysis on the Automobile Stabilizer Bar Based on ANSYS

Stabilizer bar is an important component of the vehicle’s independent suspension system and plays an important role in the safety traffic. Therefore, the research on fatigue strength characteristics of the automobile stabilizer bar is very important. In this paper, the finite element model is established for the automobile stabilizer bar by utilizing ANSYS finite element analysis software. The ...

The dynamic characteristic analysis of spindle based on ANSYS

The basic concept of dynamic characteristics of spindle is introduced. The first ten order vibration mode and natural frequency of shaft are obtained by modal analysis and harmonic response analysis using software ANSYS. The deformation trend of spindle under resonance state is analysed and the contrast between theory and simulation critical speed is done. The frequency response curve of spindl...