Fast pyrolysis processing of surfactant washed Miscanthus
نویسندگان
چکیده
منابع مشابه
Pyrolysis Kinetics of Washed Precipitated Lignin
This article describes the pyrolysis behavior of precipitated washed lignin in a Laminar Entrained Flow Reactor between 700 and 1000°C and at different residence times. Lignin was precipitated by acidification of softwood black liquor using CO2. After acid washing, the solid material was dried and sieved (80-100 μm). This material was then fed into the reactor at a rate of about 0.1 g/min. The ...
متن کاملPressurised pyrolysis of Miscanthus using a fixed bed reactor.
Miscanthus x giganteus was pyrolysed, in a fixed bed reactor in a constant flow of dinitrogen gas, at a rate of 13°C/min from ambient to 550°C, then held for 25 min at this temperature. The pressures employed ranged from atmospheric to 26 bar. The major compounds identified in the bio-oil were water, phenol, and phenol derivatives. The water contents impact on the usefulness of the bio-oil as a...
متن کاملFast Pyrolysis of Lignins
Three lignins: Indulin AT, Lignoboost, and Acetocell lignin, were characterized and pyrolyzed in a continuous-fed fast pyrolysis process. The physical and chemical properties of the lignins included chemical composition, heat content, ash, and water content. The distributed activation energy model (DAEM) was used to describe the pyrolysis of each lignin. Activation energy distributions of each ...
متن کاملCatalytic Fast Pyrolysis: A Review
Catalytic pyrolysis is a promising thermochemical conversion route for lignocellulosic biomass that produces chemicals and fuels compatible with current, petrochemical infrastructure. Catalytic modifications to pyrolysis bio-oils are geared towards the elimination and substitution of oxygen and oxygen-containing functionalities in addition to increasing the hydrogen to carbon ratio of the final...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel Processing Technology
سال: 2014
ISSN: 0378-3820
DOI: 10.1016/j.fuproc.2014.07.005