Failure Prediction of GFRP Pultruded Single-Lap Adhesive Joints
نویسندگان
چکیده
منابع مشابه
Fatigue behaviour of composite adhesive lap joints
This paper is concerned with a fatigue study of composite adhesive lap joints produced from a bi-directional woven E-glass fibres and polypropylene. The adhesive used was a Bostik 7452 (Rubber & Plastics Grade) ethyl cyanoacrylate type. The effects of layer orientation, lap joint length and water immersion on the fatigue behaviour were studied. The specimens were immersed in water during period...
متن کاملSemi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints
A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...
متن کاملThe Fuzzy Finite Element Stress Analysis of Adhesive-Bonded Single Lap Joints
An adhesive-bonded single lap joint is analyzed using a new fuzzy finite element model. In the model, Young’s moduli and Poisson’s ratios of the joint materials are taken as fuzzy numbers in order to take the uncertainty of the material properties into account. The fuzzy numbers are modeled using linear triangular membership functions. At a selected material point in the adhesive layer, the pos...
متن کاملThree-dimensional modeling of carbon/epoxy to titanium single-lap joints with variable adhesive recess length
The objective of this paper was to investigate the performance of recessed single-lap joints with dissimilar adherends through the finite element method. The influence of material and geometric nonlinearity of the adhesive as well as the impact of the recess length was examined in terms of maximum principal stresses. The strength of the joint was obtained as the load to initiate the crack propa...
متن کاملA Probabilistic Method to Predict the Strength of Adhesively Bonded Joints of Gfrp
Experimental and numerical investigations were carried out on adhesively bonded full-scale double lap joints from pultruded GFRP profiles with relatively thick adhesive layers, needed in infrastructure applications to compensate for tolerances. The influence of different geometrical parameters on the joint strength was investigated, namely the thickness of the adhesive layer (from 5 to 35 mm), ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revue des composites et des mate?riaux avance?s
سال: 2021
ISSN: ['1169-7954', '1958-5799']
DOI: https://doi.org/10.18280/rcma.310301