Failure of spot welds under in-plane static loading
نویسندگان
چکیده
منابع مشابه
Failure of Fibrous Composite Plates under Static Biaxial Planar Loading
This paper outlines an experimental investigation carried out for the analysis of failure mechanisms in fibrous laminated composite plates containing stress raisers, in the form of cutouts, under static biaxial planar compressive loadiing. A specially designed biaxial loadiing frame was used to test a series of 48 ply graphite/epoxy composite laminated plates with centrally located circular hol...
متن کاملModeling of human calvarium under static loading
There are many papers on head modeling in literature [1]. Generally, the topic of most of them is designing and modeling devices for head (especially brain) protection, e.g. helmets. On the other side, most papers are about modeling of whole part of top body (a torso and a head). The main aim of these researches is simulation of the backbone behavior under external load applied to the head. The...
متن کاملBuckling Analysis of Simply-supported Functionally Graded Rectangular Plates under Non-uniform In-plane Compressive Loading
In this research, mechanical buckling of rectangular plates of functionally graded materials (FGMs) is considered. Equilibrium and stability equations of a FGM rectangular plate under uniform in-plane compression are derived. For isotropic materials, convergent buckling loads have been presented for non-uniformly compressed rectangular plates based on a rigorous superposition fourier solution f...
متن کاملOptimization of infinite composite plates with quasi-triangular holes under in-plane loading
This study used particle swarm optimization (PSO) to determine the optimal values of effective design variables acting on the stress distribution around a quasi-triangular hole in an infinite orthotropic plate. These parameters were load angle, hole orientation, bluntness, fiber angle, and material properties, which were ascertained on the basis of an analytical method used by Lekhnitskii [3]. ...
متن کاملThe effect of zirconia framework design on the failure of all-ceramic crown under static loading
PURPOSE This in vitro study aimed to compare the failure load and failure characteristics of two different zirconia framework designs of premolar crowns when subjected to static loading. MATERIALS AND METHODS Two types of zirconia frameworks, conventional 0.5 mm even thickness framework design (EV) and 0.8 mm cutback of full contour crown anatomy design (CB), were made for 10 samples each. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Mechanics
سال: 2001
ISSN: 0014-4851,1741-2765
DOI: 10.1007/bf02323111