Failure modeling of composite wing leading edge under bird strike
نویسندگان
چکیده
منابع مشابه
International Bird Strike Committee
Aircraft repeatedly prove that birds and aircraft cannot occupy the same airspace at the same time. In an average year about 3000 birdstrikes cause 50-80 million US dollars in damage to USAF aircraft. To the worldwide aviation fleet this problem is estimated to cost more than three billion US dollars per year. Factors for consideration in establishing birdstrike resistance requirements, and in ...
متن کاملThe leading-edge vortex of swift wing-shaped delta wings
Recent investigations on the aerodynamics of natural fliers have illuminated the significance of the leading-edge vortex (LEV) for lift generation in a variety of flight conditions. A well-documented example of an LEV is that generated by aircraft with highly swept, delta-shaped wings. While the wing aerodynamics of a manoeuvring aircraft, a bird gliding and a bird in flapping flight vary signi...
متن کاملTopology Optimization of Adaptive Compliant Aircraft Wing Leading Edge
A network analysis technique is introduced which may be used for determining and parameterizing the load paths in a lattice structure to enable a load path-based topology optimization to be carried out in a way that permits the use of Genetic Algorithms. This technique provides the designer with a greater level of control over the problem complexity than alternative schemes and enables the use ...
متن کاملThe Costs of Bird Strikes and Bird Strike Prevention
Collisions between birds (and other wildlife) and aircraft are known to cause substantial losses to the aviation industry in terms of damage and delays every year. Techniques exist to control bird numbers on airfields and hence to reduce the number of wildlife strikes, but they are applied at widely different levels from airport to airport. Some of this variation may be due to differing levels ...
متن کاملBuckling Analysis of Rectangular Laminated Composite Plates With An Edge Delamination Under Compressive Load
The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composite Structures
سال: 2021
ISSN: 0263-8223
DOI: 10.1016/j.compstruct.2020.113005