Failure mode and effects analysis for errors detected during pretreatment physics plan and chart review in external beam radiotherapy

Failure Mode and Effects Analysis Using Data Envelopment Analysis

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Application of failure mode and effects analysis to treatment planning in scanned proton beam radiotherapy

BACKGROUND A multidisciplinary and multi-institutional working group applied the Failure Mode and Effects Analysis (FMEA) approach to the actively scanned proton beam radiotherapy process implemented at CNAO (Centro Nazionale di Adroterapia Oncologica), aiming at preventing accidental exposures to the patient. METHODS FMEA was applied to the treatment planning stage and consisted of three ste...

A Simulation Study on Patient Setup Errors in External Beam Radiotherapy Using an Anthropomorphic 4D Phantom

Introduction Patient set-up optimization is required in radiotherapy to fill the accuracy gap between personalized treatment planning and uncertainties in the irradiation set-up. In this study, we aimed to develop a new method based on neural network to estimate patient geometrical setup using 4-dimensional (4D) XCAT anthropomorphic phantom. Materials and Methods To access 4D modeling of motion...

Failure Mode and Effects Analysis Using Generalized Mixture Operators

Failure mode and effects analysis (FMEA) is a method based on teamwork to identify potential failures and problems in a system, design, process and service in order to remove them. The important part of this method is determining the risk priorities of failure modes using the risk priority number (RPN). However, this traditional RPN method has several shortcomings. Therefore, in this paper we p...