Failure Behavior of Pin-jointed Cylindrical Composites Using Acoustic Emission Technique
نویسندگان
چکیده
منابع مشابه
failure behavior assessing of wood strands under tensile loading using acoustic emission technique
with the aim of identifying failure mechanism in oriented strand boards, failure behavior of wood strands under tensile load was investigated using acoustic emission technique. resinated and unresinated strands were arranged at top, middle and bottom section of the board before pressing. tensile and acoustic emission tests were performed simultaneously on treated and control samples. using tens...
متن کاملAcoustic Emission in Composites Using MPA
The purpose of this study is to try to determine the current mechanical state of a composite specimen (or structure) and predict its remaining lifetime from the characteristics of the acoustic emission (AE) signals it emits under load. In previous studies of the characteristics of AE generated in graphiteepoxy composites, empirical observations were made relating the frequency content and the a...
متن کاملStudy of Damaged Zone around Circular Opening Using Acoustic Emission Technique
One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...
متن کاملCharacteristics of Acoustic Emission Signals from Composites
Certain characteristics of acoustic emission (AE) signals from graphite-epoxy composite specimens were correlated last year with the mechanical behavior of the materials. Moisture degradation, which reduced the ultimate strength, resulted in a change in the AE amplitude distribution early in the loading history. Also, AE having distinct frequency spectral types tended to occur at or near singul...
متن کاملStudy of the Frictional Surface Damage Using Acoustic Emission Method
In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Propulsion Engineers
سال: 2012
ISSN: 1226-6027
DOI: 10.6108/kspe.2012.16.4.009