Failure behavior of 2024-T3 aluminum under tension-torsion conditions
نویسندگان
چکیده
منابع مشابه
Crack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions
The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...
متن کاملPrediction of Crack Growth under Variable-Amplitude Loading in Thin-Sheet 2024-T3 Aluminum Alloys
The present paper is concerned with the application of a “plasticity-induced” crack closure model to study fatigue crack growth under various load histories. The model was based on the Dugdale model but modified to leave plastically deformed material in the wake of the advancing crack. The model was used to correlate crack growth rates under constant-amplitude loading and then used to predict c...
متن کاملCORROSION RESISTANT SOL–GEL COATING ON 2024-T3 ALUMINUM
The inherent reactivity of the Al–Cu alloys is such that their use for structural, marine, and aerospace components and structures would not be possible without prior application of a corrosion resistance system. Historically these corrosion resistance coatings were based on the use of chemicals containing Cr (VI) compounds. Silane coatings are of increasing interest in industry due to th...
متن کاملEffect of Temperature and Aging Time on 2024 Aluminum Behavior
This study is a follow-up of previous work by the authors on the effects of processing variables on the deformation and fracture of 2024-T4 aluminum. In the previous work, four variables were incorporated into a Design of Experiments methodology: solution temperature, solution time, cooling rate and natural aging time. Solution time and cooling rate were found to be the most significant factors...
متن کاملA Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds
Three-dimensional residual stress mapping of an aluminum 2024-T3 arcan specimen, butt-welded by the friction stir technique, was performed by neutron diffraction. Results indicate that the residual stress distribution profiles across the weld region are asymmetric with respect to the weld centerline, with the largest gradients in the measured residual stress components occurring on the advancin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanical Science and Technology
سال: 2015
ISSN: 1738-494X,1976-3824
DOI: 10.1007/s12206-015-1011-3