Failure and Deformation of Sand in Torsional Shear

Nonlocal effects in torsional deformation

The stress distribution in torsionally deformed cylindrical polycrystalline copper samples was investigated. The strain in torsional deformation changes with distance from the torsional axis and thus the local extent of work hardening and consequently the local flow stress changes as well. The variation of the flow stress with radial position in the samples was measured by microhardness tests. ...

Multiscale analysis of shear failure of thick-walled hollow cylinder in dry sand

A novel hierarchical multiscale model has been applied to simulate the thick-walled hollow cylinder tests in dry sand and to investigate the corresponding shear failures. The combined finite-element method and discrete-element method (FEM/DEM) model employs the FEM as a vehicle to advance the solution for a macroscopic non-linear boundary value problem incrementally. It is, meanwhile, free of c...

Shear Deformation in Granular Material

An investigation into the properties of granular materials is undertaken via numerical simulation. These simulations highlight that frictional contact, a defining characteristic of dry granular materials, and interfacial debonding, an expected deformation mode in plastic bonded explosives, must be properly modeled. Frictional contact and debonding algorithms have been implemented into FLIP, a p...

A method for assessing failure behavior of sand with initial static shear

synthesis of sulfides from alcohols and thiols in solvent-freeconditions and deoxygenation of sulfoxides

کاتالیست یک سنتز جدید برای تیواترها توصیف شده است. واکنش الکل ها با آریل، هتروآریل و آلکیل تیو ل ها درحضور 1،3،5- تری آزو- 2،4،6- تری فسفرین-2،2،4،4،6،6 هگزاکلراید ((tapc به عنوان یک کاتالیست موُثر، بازده های خوب تا عالی از تیواترها را حاصل می کند. علاوه براین، واکنش تحت شرایط بدون فلز و بدون حلال پیش می رود، بنابراین یک مکمل جالب برای روش های شناخته شده سنتز تیواترها ارائه می دهد. یک مکانیسم ا...