منابع مشابه
Stress Analysis at a Bi-Material Interface Crack-tip
The optical methods of Caustics, Photoelasticity and Isopachics for the evaluation of the stress intensity factors and the distribution of the principal stresses at a bi-material interface crack-tip, were proposed. The caustics, isochromatic and isopachic fringes are developed from the stress field which results from a stress function X(r, ). When the crack-tip, which is perpendicular to interf...
متن کاملInfluence of modeling material on undercut slope failure mechanism
A series of physical modeling tests were conducted by means of a beam type geotechnical centrifuge machine in order to investigate the drainage impact on the slope failure mechanism under centrifugal acceleration. Meanwhile, the phenomenon of stress redistribution in undercut slopes and the formation of arching effect were studied. For this purpose, a poorly graded sandy soil (Silica sand No. 6...
متن کاملAdditive/Subtractive Material Processing for Mesoscopic Parts
Mesoscopic additive/subtractive material processing (Meso A/SMP) is a solid freeform fabrication technique capable of producing engineering parts in mesoscopic (100 micron to several millimeters) scales. This process integrates silicon processing, electroplating, hot pressing, casting, and traditional machining methods to provide opportunities for 3D layer fabrication and parallel production, a...
متن کاملExtension of Batches Petri Nets by Bi-parts Batch Places
This paper proposes an extension of Batches Petri Nets by a new definition of the batch place called Bi-parts Batch place (BBplace). The flow-density equations that govern the dynamics of controllable batches inside a BB-place is now defined by a triangular relation. To take into account controlled events, the behaviors of batches are discussed according to a variation of speeds and of maximum ...
متن کاملGeometrical Aspects on Bi-Material Microtensile Tests
Recently the bond strength of composite resin to tooth has received attention from researchers of dental materials. Limitations imposed by the biological substrate, such as the size of the specimen, fostered the development of a tensile test with small dimensions. Due to the reduced size of the specimens, the test is called microtensile test. The specialized literature has not presented standar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2019
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2019.09.044