Failure analysis and strengthening mechanism of Z-pinned composite T-joints under tensile loading
نویسندگان
چکیده
منابع مشابه
Failure Procedure in Adhesive Composite Joints under Different Types of Loading
In this paper, we have used numerical simulation to study failure of adhesive joints in composite plates. To determine the failure load, adhesive joints are subjected to different types of loading and gradual failure of the joint is studied using the finite element method. The composite material failure theory is implemented into the FEM software. Also different geometries for the joint edge ar...
متن کاملfailure and stress analysis of glass fiber reinforced laminated composite pinned joints
in this study, behavior of pin-loaded glass fiber reinforced with polyethylene laminated composites with different stacking sequence and different dimensions has been observed experimentally and stress analysis was performed using ansys software. the aim is to investigate stresses, failure strength and failure mode of composite laminates containing a pin loaded hole when the material exhibits l...
متن کاملInfluence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading
Use of composites for a range of structural application in aircrafts, space-crafts, automobiles, etc., has widely spread in the last few years. Other than weight reduction, cut-outs provide pathways to link different aircraft parts. In this paper, an experimental investigation was conducted to study the effect of a cut-out on the tensile strength of the fiber glass/ epoxy composite plate. Geome...
متن کاملAn Experimental Study on the Tensile Behaviors of Ultrasonic Welded T-joints for Polyamide Composite
In this paper, an experimental investigation on ultrasonic welding of polyamide composites reinforced with glass fiber has been carried out. The effect of ultrasonic welding parameters, such as welding time, air pressure, hold time and the amount of glass fiber in the composite on tensile strength of weld joints were determined using response surface methodology. This methodology was applied fo...
متن کاملDamage Evolution in Composite Bonded Joints under Fatigue Loading
The fatigue behaviour of single lap bonded joints under fatigue loading was already investigated and a suitable life prediction model was presented and validated [1-2]. The model is based on the actual damage evolution under fatigue load: a crack initiation followed by its propagation up to a critical length [2, 3]. In the present paper the evolution of fatigue damage in single lap joints is ex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and Engineering of Composite Materials
سال: 2017
ISSN: 2191-0359,0792-1233
DOI: 10.1515/secm-2015-0388