Facile Thermally Impacted Water-Induced Phase Separation Approach for the Fabrication of Skin-Free Thermoplastic Polyurethane Foam and Its Recyclable Counterpart for Oil-Water Separation
نویسندگان
چکیده
منابع مشابه
Fabrication of Gelatin Scaffolds Using Thermally Induced Phase Separation Technique
Gelatin is considered as a partially degraded product of collagen and it is a biodegradable polymer which can be used to produce scaffolds for tissue engineering. Three-dimensional, porous gelatin scaffolds were fabricated by thermally induced phase separation and freeze-drying method. Their porous structure and pore size were characterized by scanning electron microscopy. Scaffolds with differ...
متن کاملSynthesis of NiFe2O4/sawdust nanocomposite for oil-water separation
organic solvents. In this study, NiFe2O4/sawdust nanocomposite was synthesized for removingoil pollutants. The oil-adsorbing nanocomposite could be easily separated from water bymagnet bar. The XRD results show tetragonal phase proving the composite formation. TheFESEM pictures successfully reveal the growth of NiFe2O4 on the sawdust template. The FTIRbands at 422 cm-1 and 615 cm-1correspond to...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Facile approach in fabricating superhydrophobic and superoleophilic surface for water and oil mixture separation.
Metal copper mesh with superhydrophobic and superoleophilic surface had been successfully fabricated via a facile solution-immersion process. The hierarchical structure was prepared on the commercial copper mesh surface by etching with the nitric acid. After being modified by 1-hexadecanethiol (HDT), the as-prepared mesh indicated both superhydrophobic and superoleophilic property simultaneousl...
متن کاملImpact of Carbon Nanotubes on the Polymeric Membrane for Oil – Water Separation
In this research, the classical phase inversion method was used to produce the polysulfone (PSF) membrane by using three different solvents: N, N-dimethylformamide (DMF), chloroform (CHCL3) and tetrahydrofuran (THF). Furthermore, different concentrations of functionalized multi – walled carbon nanotubes (MWCNTs) were added to PSF membranes by the classical phase inversion method...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Macromolecular Rapid Communications
سال: 2018
ISSN: 1022-1336
DOI: 10.1002/marc.201870060