Facile Method to Prepare for the Ni2P Nanostructures with Controlled Crystallinity and Morphology as Anode Materials of Lithium-Ion Batteries
نویسندگان
چکیده
منابع مشابه
Facile synthesis of SnO2 nanocrystals anchored onto graphene nanosheets as anode materials for lithium-ion batteries.
A SnO2/graphene nanocomposite was prepared via a facile solvothermal process using stannous octoate as a Sn source. The as-prepared SnO2/graphene nanocomposite exhibited excellent electrochemical behavior with a high reversible capacity, a long cycle life and a good rate capability when used as an anode material for lithium-ion batteries.
متن کاملMonodispersed mesoporous Li4Ti5O12 submicrospheres as anode materials for lithium-ion batteries: morphology and electrochemical performances.
Although nanosizing Li4Ti5O12 (LTO) materials is an effective way to improve their rate performances, their low tap density and first cycle coulombic efficiency limit their practical applications. To tackle these problems while preserving the advanced rate performances, monodispersed mesoporous LTO submicrospheres are developed here. These submicrospheres are synthesized via a solvothermal meth...
متن کاملSynthesis of Mesoporous ZnO Nanosheets via Facile Solvothermal Method as the Anode Materials for Lithium-ion Batteries
Mesoporous ZnO nanosheets are synthesized through a room temperature solvothermal method. Transmission and scanning electronic microscopy observations indicate that as-prepared ZnO hierarchical aggregates are composed and assembled by nanosheets with a length of 1-2 μm and a thickness of 10-20 nm, and interlaced ZnO nanosheets irregularly stack together, forming a three-dimensional network. Fur...
متن کاملFacile synthesis of nanostructured TiNb2O7 anode materials with superior performance for high-rate lithium ion batteries.
One-dimensional nanostructured TiNb2O7 was prepared by a simple solution-based process and subsequent thermal annealing. The obtained anode materials exhibited excellent electrochemical performance with superior reversible capacity, rate capability and cyclic stability.
متن کاملInitial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ACS Omega
سال: 2018
ISSN: 2470-1343,2470-1343
DOI: 10.1021/acsomega.8b00482