Facile growth of high transmittance ZnO micro-rod clusters on indium tin oxide by a wet-chemical synthesis method
نویسندگان
چکیده
A simple wet-chemical synthesis method was developed to fabricate Zinc oxide micro-rod clusters. The process involved the rapid dilution of a zinc-bearing alkaline solution at 150°C in convection oven on indium tin (ITO) substrates. carried out by immersing an unseeded ITO substrate mixture zinc nitrate hexahydrate (Zn(NO 3 ) 2 ·6H O) and hexamethylenetetramine ((CH 6 N 4 aqueous solution. obtained sample annealed 400°C for h. structural, morphological optical properties synthesized ZnO microstructures were investigated X-ray diffraction, scanning electron microscopy ultraviolet-visible spectroscopy, respectively. rod clusters are hexagonal phase wurtzite structure. crystal grain sizes films found be 72.6, 84.3 66.3 nm (100), (002) (101) planes, bandgap determined 3.147 eV.
منابع مشابه
Enhanced photocatalytic activity of Ag–ZnO hybrid plasmonic nanostructures prepared by a facile wet chemical method
We report the synthesis of Ag-ZnO hybrid plasmonic nanostructures with enhanced photocatalytic activity by a facile wet-chemical method. The structural, optical, plasmonic and photocatalytic properties of the Ag-ZnO hybrid nanostructures were studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL) an...
متن کاملOn the initial growth of indium tin oxide on glass
The initial growth mode of indium tin oxide on glass was studied. An interesting transition from a 3D island growth mode at low temperatures to 2D growth at higher temperature was observed. This transition from the Volmer-Weber mechanism to the Frank–van der Merwe mechanism occurs at about 150°C. It coincides with the transition from amorphous to polycrystalline growth of the thin films. © 1996...
متن کاملSynthesis of a Nonagglomerated Indium Tin Oxide Nanoparticle Dispersion
The importance and use of transparent conducting oxides (TCOs) has grown significantly over the last decade. The most successful of these materials is tin-doped indium oxide (ITO), which can be found in a wide variety of applications including flat-panel displays, functional glass, solar cells, and lightemitting diodes. When deposited as a thin film, the conductivity of an ITO layer commonly re...
متن کاملChemical Vapor Deposition Synthesis of Novel Indium Oxide Nanostructures in Strongly Reducing Growth Ambient
The current study reports some interesting growth of novel In2O3 nanostructures using ambient-controlled chemical vapor deposition technique in the presence of a strongly reducing hydrazine ambient. The experiments are systematically carried out by keeping either of the carrier gas flow rate or the source temperature constant, and varying the other. For each of the depositions, the growth is st...
متن کاملRoom temperature synthesis of indium tin oxide nanotubes with high precision wall thickness by electroless deposition
Conductive nanotubes consisting of indium tin oxide (ITO) were fabricated by electroless deposition using ion track etched polycarbonate templates. To produce nanotubes (NTs) with thin walls and small surface roughness, the tubes were generated by a multi-step procedure under aqueous conditions. The approach reported below yields open end nanotubes with well defined outer diameter and wall thic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites and advanced materials
سال: 2021
ISSN: ['2634-9833']
DOI: https://doi.org/10.1177/26349833211038954