Fabrication process of YBCO thin film starting from amorphous film for microstrip line device
نویسندگان
چکیده
منابع مشابه
Fabrication of Thin-Film LAPS with Amorphous Silicon
To improve the spatial resolution of the light-addressable potentiometric sensor (LAPS), it is necessary to reduce the thickness of the semiconductor layer, which, however, causes a problem of the mechanical strength of the sensor plate. In this study, a thin-film LAPS was fabricated with amorphous silicon (a-Si) deposited on a transparent glass substrate. The current-voltage characteristics an...
متن کاملA New Fabrication Process for Thin-film Multijunction Thermal Converters
-Advanced thin film processing and packaging technologies are employed in the fabrication of new planar thinfilm multifunction thermal converters. The processing, packaging, and design features build on experience gained from prior NIST demonstrations of thin-film converters and are optimized for improved sensitivity, bandwidth, manufacturability, and reliability.
متن کاملProcess Optimization of Deposition Conditions for Low Temperature Thin Film Insulators used in Thin Film Transistors Displays
Deposition process for thin insulator used in polysilicon gate dielectric of thin film transistors are optimized. Silane and N2O plasma are used to form SiO2 layers at temperatures below 150 ºC. The deposition conditions as well as system operating parameters such as pressure, temperature, gas flow ratios, total flow rate and plasma power are also studied and their effects are discussed. The p...
متن کاملThin film dielectric microstrip kinetic inductance detectors
Benjamin A. Mazin, Daniel Sank, Sean McHugh, Erik A. Lucero, Andrew Merrill, Jiansong Gao, David Pappas, David Moore, and Jonas Zmuidzinas Department of Physics, University of California–Santa Barbara, Santa Barbara, California 93106-9530, USA National Institute of Standards and Technology, Boulder, Colorado 80305-3328, USA Department of Physics, California Institute of Technology, Pasadena, Ca...
متن کاملAmorphous thin film growth: minimal deposition equation
A nonlinear stochastic growth equation is derived from (i) the symmetry principles relevant for the growth of vapor deposited amorphous films, (ii) no excess velocity, and (iii) a low-order expansion in the gradients of the surface profile. A growth instability in the equation is attributed to the deflection of the initially perpendicular incident particles due to attractive forces between the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physics Procedia
سال: 2012
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2012.03.465