Fabrication Process of Micro Bonding Elements with Taper Shape
نویسندگان
چکیده
منابع مشابه
Fabrication of Wireless Micro Pressure Sensor Using the CMOS Process
In this study, we fabricated a wireless micro FET (field effect transistor) pressure sensor based on the commercial CMOS (complementary metal oxide semiconductor) process and a post-process. The wireless micro pressure sensor is composed of a FET pressure sensor, an oscillator, an amplifier and an antenna. The oscillator is adopted to generate an ac signal, and the amplifier is used to amplify ...
متن کاملFabrication of micro-optical switch by post-CMOS micromachining process
This work presents the micro-machined 2-D switch array for use on free-space optical interconnect platform integrated with a digital 1×8 de-multiplexer control circuit together. Moreover, this device employs electrostatic actuation for light beam directions control. The CMOS-MEMS array-based optical platform contains 10×10 circular micromirrors switching spots, the diameter of each mirror is ab...
متن کاملFabrication of Micro-Optics Elements with Arbitrary Surface Profiles Based on One-Step Maskless Grayscale Lithography
A maskless lithography method to realize the rapid and cost-effective fabrication of micro-optics elements with arbitrary surface profiles is reported. A digital micro-mirror device (DMD) is applied to flexibly modulate that the exposure dose according to the surface profile of the structure to be fabricated. Due to the fact that not only the relationship between the grayscale levels of the DMD...
متن کاملHigh Yield Micro Fabrication Process for Biomimetic Artificial Haircell Sensors
We have developed artificial haircell sensors based on an improved plastic deformation magnetic assembly (PDMA) method. The PDMA method is uniquely capable of realizing three-dimensional microstructures in an efficient, ICcompatible manner. We have improved the design of the PDMA structure to significantly increase the yield by eliminating stress concentration. The robustness of the fabricated ...
متن کاملUWB Antenna Array with Comb Taper Slot Antenna Elements
A uniformly spaced comb taper slot antenna array is proposed for directional ultra-wideband (UWB) applications. The UWB array consists of four identical comb taper slot antennas, a mutistage with four-way microstrip UWB power divider, and four identical coaxial cable lines. A maximum gain of 15.5dBi within the band is obtained when the element separation is properly selected. The uniform spacin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Sensors and Micromachines
سال: 2002
ISSN: 1341-8939,1347-5525
DOI: 10.1541/ieejsmas.122.90